1. Wake-up requires multiple trigger commands, we will optimize 2. There are plans for a charging base, thank you for your suggestion 3. The name restriction of Activity will be relaxed when the app is updated next time 4. Below the label is a protective film, which is sticky 5. Thank you for your feedback on English issues, we will improve and update

1. We will update the firmware to fix the problem 2. We are considering optimizing the problem of key wake-up 3. The macro button of the current version, the created macro cannot be deleted temporarily, and can be deleted after the version is updated 4. Sorry for the spelling error, we will correct it, thank you for your reminder

Thanks for your feedback, we will continue to fix the current issue. Regarding the mentioned bug report, you can send it via email or via the feedback window in the app

1. ROKU can be added by wifi or infrared. Have you tried both? 2. What is the detailed model number of Onkyo receivew, is it added by searching the model number? 3. The learning function problem is expected to release a new version update before next week

1. We will update the firmware to fix the problem 2. We are considering optimizing the problem of key wake-up 3. The macro button of the current version, the created macro cannot be deleted temporarily, and can be deleted after the version is updated 4. Sorry for the spelling error, we will correct it, thank you for your reminder

Thanks for the feedback, we will fix it

Thanks for the feedback, we will fix it

it's bluetooth device, please try add device via bluetooth and select "other" to add. After add it, you need to use the original remote control to control the device, enter the Bluetooth search interface, search sofabaton x1, and pair it. Once Bluetooth pairing completed, you can control it.

1. Make sure that the router you are using has been connected to the external network normally, synchronize and power off the router and restart the router. If the router has the HomeShield Pro function, please turn off the HomeShield Pro function or authorize X1 to access it. Because this function may prevent X1 HUB access. I would like to ask if the WIFI network at home is a mesh network composed of two WIFI devices. If so, please activate the HUB on one of the DNS extended networks; we have also purchased an Amazon Eero 6 Pro router, and we will test and solve the problem. How to connect? 1. Please ensure that the router used is normally connected to the external network, synchronize and restart the router with the power off. 2, please refer the link https://www.youtube.com/watch?v=fvCGN_Bmmf4; 3. Please make sure directly connects the HUB to the router, and try not to connect the router through the Mesh Repeter. If so, it needs to be set to WiFI2.4g, because the HUB only supports WIFI 2.4g. 4. Ensure that the mobile phone and HUB are connected to the same router, that means the mobile phone must be connected to the same router to discover the HUB device in the LAN. 5. Ensure that the distance between the HUB and the router is not too far. 6. If the connection fails, please plug and unplug the power supply of the HUB and restart the APP to search the X1 HUB device. 7. If the device is still not found through the above steps, please share a hotspot with another mobile phone, regard the hotspot as a router, connect the HUB and mobile phone to this hotspot, and then see whether the device can be found. If you can search the device through the hotspot, you can add the device you want to control first. Please inform the customer of the brand and model of the router for synchronization. We will test and optimize

The code base has been updated to the system, please search for Sony STR-DN1080-1 and add it again The learning function is being optimized, and an update is expected to be released next week thank you for your patience