STR DN1080 not working

Dooga 1 year ago ⋅ 616 Read it

My Sony STRDN1080 AV receiver is not working. I have loaded both sets of codes ( including the -1 version) For one the on/off works, for the other nothing works. I have 4 other devices that are working fine. The STRDN1080 is the centre of my system, therefore no activities work. Please help me, it appears many are having the same problem. Thank you

All comments: 11 .

  • ngran2022-07-09
    After one of the latest updates, I went over each button and used the add/repair feature. It took some time to find the correct codes from the list, but in the end all buttons work fine. And i can change to any device.
    @thoraxx: Changing devices does not work after July 1st update anymore.
  • thoraxx2022-07-03
    Changing devices does not work after July 1st update anymore.
  • trankillity2022-04-20
    Similar to others here, the codes in the device provided by SofaBaton only work if you HOLD the button down. This is basically useless. There's a good chance that the official STR-DN1080 remote actually has different codes for whether you're holding the button or pressing it and Sofabaton have recorded the hold codes where the receiver expects the signal to hold for a certain time.
    @SofaBaton: The X1 codebase is already included for your device, please try again.
  • ngran2022-04-18
    @SofaBaton, i understand that by supporting thousands of different devices, you are not able to personally verify most of the codes, but you should at least give the community the ability share what they have already found that works. That way we will sort out what is working what is not, by our selves (not the best solution, but at least way better than each person having to go over the same problems)
  • ngran2022-04-18
    I had the same issue. The worst part for me was, that i was not able to manually copy the codes form the original remote. It looked like the codes are copied correctly, but none of them worked. In the end i wend and manually reassigned each button from the items in the code base. It took me more than 45 minutes, and not all buttons are working now, but at lease i can control the main functions. Unfortunately the buttons for changing the inputs did not work :(
  • macray762022-04-18
    Having the same issue. I thought I could resolve it by putting in two change input commands one after the other in the activity startup but that doesn't work. Without this being fixed the whole system is useless to me.
I have something to say:
  • OωO
  • |´・ω・)ノ
  • ヾ(≧∇≦*)ゝ
  • (☆ω☆)
  • (╯‵□′)╯︵┴─┴
  •  ̄﹃ ̄
  • (/ω\)
  • ∠( ᐛ 」∠)_
  • (๑•̀ㅁ•́ฅ)
  • →_→
  • ୧(๑•̀⌄•́๑)૭
  • ٩(ˊᗜˋ*)و
  • (ノ°ο°)ノ
  • (´இ皿இ`)
  • ⌇●﹏●⌇
  • (ฅ´ω`ฅ)
  • (╯°A°)╯︵○○○
  • φ( ̄∇ ̄o)
  • ヾ(´・ ・`。)ノ"
  • ( ง ᵒ̌皿ᵒ̌)ง⁼³₌₃
  • (ó﹏ò。)
  • Σ(っ °Д °;)っ
  • ( ,,´・ω・)ノ"(´っω・`。)
  • ╮(╯▽╰)╭
  • o(*////▽////*)q
  • >﹏<
  • ( ๑´•ω•) "(ㆆᴗㆆ)
  • (。•ˇ‸ˇ•。)
  • Emoticons