×
Login
Nickname
Password
Login
X1
U1
Holiday Announcement
Remote control
Affiliate
Tags
Login
Register
Tip: ORtek VRC-1100 doesn't work? Use Hama 52451 instead
After much trial and error attempting to get the code base for the ORTek VRC-1100 code base to import, I've discovered that...
Patriq
X1
1 year ago
664
3
X1 remote bricked : is there any support somewhere ?
Hi, since the 28th april and the last firmware update, my remote control is bricked. The screen won't turn on anymore, no b...
Albator
X1
1 year ago
2615
12
Panasonic TX-JZ1500B
Please add the Panasonic TX-JZ1500B to the code repositry
yeoman
X1
1 year ago
509
1
How do I control my Apple TV sound?
I use an old HomePod as my center sound for my TV setup together with my Appletv and I had (now broken) a Harmony Elite whi...
Howard
X1
1 year ago
1295
11
X1: Possibility to manually add/edit codes?
Hi! Is it possible to manually add/edit codes (commands for a device, that is)? In my case, the controlled device (VU+ set-...
kapakka
X1
1 year ago
1051
3
CEC and ARC
Does it play any role, how cec/arc are set on the devices, when start or close actions ?
Tomika
X1
1 year ago
810
4
Add devices
Hi, can you please add the following: New Apple TV 4k (remote has on/off button) Marantz SR6012 Samsung TV QE55Q90RAT Oppo ...
Daydream
X1
1 year ago
718
3
Remote lost connection to hub
Had a couple of occasions that remote doesn't start an activity but after some time displays a message "Lost hub" Starting ...
trosenda
X1
1 year ago
706
8
X1 device
Please add TV LG 65NANO867NA
Tomika
X1
1 year ago
679
1
X1 activities cannot go directly to the source that designated
In activities, it goes directly to the last source that I watched instead of going directly to the source that I designated...
NewAL8
X1
1 year ago
2298
13
1
...
134
135
136
...
177
Most Popular Articles
1.
2022.9.9, Major Update of Android APP ,HUB
2.
【Tutorial】 X1 User Guide and FAQ, Continuously Updated...
3.
X1 Hub Upgrade Already!
4.
How to program macros?
5.
What I learned about the U1 (edited)
6.
Major Advancement: X1 Hub firmware version V15 is here!
Latest Release
1.
Toshiba Model 75Z670MP
2.
Volume controls - with Denon AVR-S60H
3.
X1S Vodafone GigaTV Bluetooth
4.
VPN Issues
5.
U2 firmware not updating
6.
Hue Bridge Pro
Latest comments
Thnx! All working now!
I also have the same issue on all of my U2's. Each U2 has it's on list of devices. U2 needs to "wake up" before buttons work. If it is woken up by "motion" then all is ok. If it is woken up by button press, I need to press the button again.
I have managed to get everything to work besides the home button - how do I get that to work?
What @Neorun said. And in the meantime you should put up a disclaimer or side note on the website because as of now it just is NOT fully compatible with Hue and when you just bought the new Hue Bridge as a first timer it's not compatible at all! One of the reasons I for one bought the XS1.
Just to check you are using the remote and not the app on a phone, the app does not do press and hold, “ramping” as you call it. If it is not working in Devises Mode it has nothing to do with the Long Press Feature as that only works in Activities. Did you try the AVR-S670H code base (I know you have a S570BT but it should work)? When you press and hold the volume button does the green light on the hub flash continuously or just once? And as an explanation the “Long Press Feature” allows each button to have 2 functions in Activities. So my 3 bars button in the PVR Activity is Short Press for Guide and Long Press for Recordings List and it can be for any devise in the Activity so my Short Press of Mute mute’s the Denon and Long Press of Mute cycles the TV Picture Modes. When this feature is used the button loses Press and Hold (ramping) functionality so is best not used on Volume and the Direction Arrows. And don’t worry “ramping” does work on the remote so it’s just a case of working out why yours isn’t.
Thank you for responding in this thread. As I mentioned in my post that you're responding to, my AVR. is the Denon S570BT. Long pressing the volume button on the X1 remote does not ramp the volume of the AVR. I've tried it both in device mode and in activities mode. I have used macro actions as well as normal button actions. I've used the cloud-based commands from sofabaton, and tried learning the long press volume button command directly from the Denon remote but still nothing I've tried works. Please help me to get this resolved before my wife hits me repeatedly in the head with the remote!