×
Login
Nickname
Password
Login
X Series
U Series
Holiday Announcement
Remote control
Affiliate
Tags
Login
Register
Sony TV KD-55XH9005 doesn’t work since update
hello, since the last firmware update, my sony TV (KD-55XH9005) no longer works. Unfortunately, this has never been found i...
Micha0174
X Series
1 year ago
423
1
Direct TV and Vizio soundbar help
I have my Mother's TV and Blu-ray Player set up fine and the Direct TV is working well also but I wondered if there is a wa...
BobbyE
X Series
1 year ago
535
4
X1 remote
Just received my sofabaton X1 today .So far this product is not looking so good in my opinion especially for the price poin...
Tom123
X Series
1 year ago
949
1
Unable to repair from database
I have an LG OLED CX TV. It has one button for ON/OFF on the remote. I know it is possible to asign 2 different signals for...
Slawo
X Series
1 year ago
896
9
Directv HR20-54 STB - Navigating through menus
When navigating through menus, guide or other lists, pressing (short press) X1 remote directional (up/dn/left/right) key, t...
83fxrs
X Series
1 year ago
1268
13
Volume Control Very Slow
Overall I'm really happy with my remote so far. I just have one issue. When I am trying to change the volume up or down and...
RadDad
U Series
1 year ago
1355
1
How can I add a code library to the cloud database?
I have a device that is missing from the database. Can I give you the codes so you add it to the code library in the cloud?
smashal
X Series
1 year ago
1171
7
Sofabaton Technical Support
I purchased a new Sofabaton U1 three days ago and I can safely say, trying to set-up two devices on this remote is close to...
Phoophan
U Series
1 year ago
2363
5
Denon AVR-X3300W missing codes - found workaround
I tried adding my Denon AVR-X3300W to my remote. It can find the model in the database, but the codes it downloads appear t...
PG1979
X Series
1 year ago
952
2
A few suggestions and a request
Been stumbling through setup and for the most part it's working. My TV is a Samsung UN65MU8000FXZA and most things are in t...
SixSpeedSamurai
X Series
1 year ago
363
2
1
...
118
119
120
...
181
Most Popular Articles
1.
2022.9.9, Major Update of Android APP ,HUB
2.
【Tutorial】 X1 User Guide and FAQ, Continuously Updated...
3.
X1 Hub Upgrade Already!
4.
How to program macros?
5.
What I learned about the U1 (edited)
6.
Major Advancement: X1 Hub firmware version V15 is here!
Latest Release
1.
Adding IR devices to database by support
2.
Bug in firmware version 5 of the X2 hub
3.
Need the ability to activate another activity
4.
Slow command repeat delay on X2
5.
Ziggo media box Next
6.
Searching for Phillips Hue Bridge
Latest comments
I would appreciate if somebody can test it with his system. I would like to know if it’s only related to my hub or if that is a common issue. Thank you very much, greetings from Germany.
I’m writing back-and-forth with the service of Sofabaton, but they only suggest to make changes in my startup sequences. That does not make sense. I had the opportunity to have a protocol within professional infrared receiver. The hub does definitely send all shutdown sequences when I start an activity..
When an activity starts, then the hub sends the shutdown sequences of all activities. That leads into problems if you switch directly into another activity that is using the same device. You can easily confirm that by generating one more activity using in example your TV and command to mute the TV in the startup sequence, and in the shutdown sequence. You will recognize that your TV will mute if you use your original activity that is using your TV. I do have an activity that is switching my TV and my Harman-Kardon receiver on. In that activity, I have a startup sequence that is switching the TV on, mute the TV and then start the Harmon-Kardon. The shutdown sequence sends mute to the TV unmute, switching the TV off and switching the Harmon-Kardon off. A second activity is only switching the Harman Kardon system on in the startup sequence and shutting it down In the shutdown sequence. Both activities are working fine when used separately using the off button on the X2. When I switch my TV on by using the original remote control from the TV, the X2 doesn't know that the TV is on. But I can control if the TV is muted or not. When I then start the activity that is only running the Harmon-Kardon receiver, the TV is muted. This is definitely a bug in the firmware of the hub. The hub should only send shut down sequences of activities that have been started before.
I second this. When I want to change channels on my DISH Hopper it requires entering 3 digit numbers. When I program such a sequence (through a macro), there are mandatory 0.5 seconds delays. This is too long for the DISH device and after two digits it stops accepting input. Consequently the channel corresponding to the first two digits is selected. Ideally, there would be a feature to send a string of numbers, with a single delay between each number programmed, and allowing times less than 0.5. I suggest allowing 0, 0.1, 0.2, 0.3, 0.4, 0.5, 1, 1.5 etc. Until the delay issue is addressed this remote is more of an annoyance to use than a benefit.
SofaBaton, thanks. I tried that and saw a slight improvement, but it's still very slow. Ideally the repeat delay would be configurable. Dave480, good idea. I have an Anthem MRX 740. I'll try some other Anthem models.
Ok Battery is the solution here :) ..my bad. Great control now, happy camper! (I was very sure I used new batteries from day 1, accidentally most probably I inserted used AA ones, if no reports back here, I 'll stay a happy camper.